All Important of Business Card

Graphic Design for Small Businesses and organizations isn’t only offering a product or service and having cash in on it. Once you start a small business, there are several features, which have to have a personal and professional focus. One of those is promoting your brand. There are a few things too, which form the foundation of promoting and one of those is the business card. The principle function of promoting is to attract the target market. When accomplished in the correct way, it can yield wonderful results. Marketing experts and graphic designers, who specialize in graphic design for small businesses, have the knowledge and experience to attract your specific client or buyer through distinct marketing and promotional tactics. A business card (or minute card) should have every piece of information essential for someone to interact and conduct business with your company or organization. There are many styles of cards, and in fact, it is necessary to decide on the appropriate style for your firm. This is why hiring a professional whom specializes in graphic design for small businesses is so important.

The product or service themselves won’t always draw in buyers or clients when shown to individuals in a prepared way. To get to the customers who will use, buy or interact with your company, one of several methods used in promoting is choosing the right business card. A card with the very best graphics, typography and layout that connect emotionally with your perspective client is the key. Every single color and color combination possesses its own meaning. There are many benefits and consequences to the use of color when contemplating the feelings and emotions of the people you’re trying to attract. Which means, a hues participation in the overall design is an essential part in selecting the most appropriate appearance of your business card. Imagine if the colors (or hues) used in your card were actually repelling your target audience you are trying to attract.

The visuals that happen to be loved by people of a distinct audience change by age and gender as well. An example is flowers; if your business makes products that are devoted to girls, then introducing flowers as visual elements (graphics) of your card will most likely attract more buyers. If though, your target is a more mature female audience, the use of flowers could be conceived as contrived and repulse your buyers. Selecting the most appropriate graphics for the business card is about the mindset of the buyer and not the business owner. Let me repeat that so you truly get it. The look, feel and emotions tied to your business card are about the buyer, not you, the business owner. If your buyer connects a personal emotion with the artwork, or possibly a design and style, employed in the card, then almost absolutely that buyer will choose the firm utilizing that artwork, design or style. For this reason alone, it is very important to work with a professional that knows and understands graphic design for small businesses.

Why have a business card in the hands of everyone that works for you? A nicely manufactured card affirms the level professionalism regarding the organization. You need a business card that is designed well with accessibility to information for your customers to make contact with you. It must be styled to create a personal connection with the buyer as well. Your reputation is riding on your business card. The primary function of your business card is to get clients to call you. Your logo should be prominent to let people know who you are the minute they see your card. After this, your business card should clearly provide methods for the client to contact you. This can be a website, a smart phone or email but it is highly recommended to have all three. A marketing expert or graphic designer whom specializes in graphic design for small businesses can help point you in the right direction for the content for your particular niche or market. Business cards with the proper visuals, content and style can help you do this. Are you ready to secure a professionally designed business card right now?

Win the Interview

Some people think that preparing for a job interview is fairly simple. Once you get the call to come in for one you essentially have the job unless you blow the interview. This is not to disrespect Walmart or McDonald’s but unless you are applying for a company like that, the interview process is not easy at all. In fact, getting the interview more times than not is easier than the actual interview itself. This pillar post is going to be for my viewers that are looking for a full-time job and hopefully it’s a highly looked at company.

The first step is having a great resume. There are plenty of good examples on the internet for samples but those are also mixed in with bad ones. Some keys things that you want in your resume are; having as many numbers as possible. It’s much more eye opening for an employer to see you raised over $10,000 in revenue during your 8 week internship than saying you raised a lot of money. Another thing is to make sure the formatting is done correctly. Make sure that everything lines up nicely and that you stay consistent on your word usage such as tenses. Also make sure to use a different starting word for the description of your prior positions. Then there are the more basic things such as make sure there are no spelling or grammar mistakes because that can instantly lose you an interview chance. LinkedIn is similar to your resume but where your resume should only include your most important and relevant things since it should only be a single full page, your LinkedIn page should include everything you’ve done. It should be a page that an employer can visit and see where you went to school, what you did there, how you did there, strengths, weaknesses, and any jobs you had up to this point.

Now if a company has asked you to come in for an interview, this is where you start researching that company. Everyone has many strengths and weaknesses, but this is where you need to see the companies values and what not and tie your best strengths to those values. It’s also where if you have a weakness of time management and their biggest thing is to have great time management, that’s a weakness you shouldn’t bring up. This next part isn’t always possible but now a days companies will let you know who you are interviewing with or it is the HR recruiter who told you that you have an interview. This is where you should look up the interviewer on LinkedIn, connect with them and learn some things about them. That way you can ask them questions more directed at them at the end of the interview. You should also ask your recruiter what specific position you are interviewing for so that you can plan accordingly for that one. Now it’s time for the dress code during an interview. Almost every job will want you to come in dressed business professional.

Even if they don’t say it, a common saying in business is that it is better to be overdressed than under dressed. For those who don’t know, business professional is a suit collared button down shirt with a suit jacket that matches the dress pants and a tie. I understand you might not already have a suit or that you don’t have the money to buy one. Some companies might understand and in that case you can just come in business casual which is business professional but without the suit jacket. If the company insists you be business professional which is understandable as you might need a suit during your job, such as if you’re visiting a client or on a company dinner. Then a possible substitute is to get one from Goodwill as they usually have an okay selection of them and can actually still be in pretty good condition. This is of course like a flat tire where it should only last you until you have the money to replace it with a real suit.

Now before the interview you should know exactly where the interview is happening at and any more specifics like if it’s in a specific room. If you are supposed to arrive at 10:00AM, leave so that you get there anytime from 8:00AM – 9:00AM. This will leave you plenty of time in case you get stuck in traffic, lost, or need to stop for something. The great part about getting there early is that you can continue to practice for the interview. One way of practicing is by looking up common asked interview questions so that you can be more confident going into the interview.

Now during the interview you’re going to want to shake every persons hand in the room whether there are two people or twenty. With the handshake make sure to have a firm grasp and go directly in, not from an upper angle or lower angle. Seems petty but some people think if you are coming in for the handshake from an upper angle, it’s you trying to show dominance. When shaking hands make sure to look the person in the eyes and introduce yourself. Then when you begin your interview make sure to calm yourself down. This will help you not to ramble on answers and or forget answers. If the interviewer asks a tough question, you don’t have to respond right away. Ask them if you can take a second to think about the answer. Most interviewers will like that you are willing to think first instead of going right into the answer. After the interview, the interviewer will ask if you have any questions. NEVER SAY NO! That can ruin your entire interview because most interviewers are waiting for questions and asking none can leave them with a bad taste in their mouth. Make sure to have 2-3 pre-planned questions and then try to think of 2-3 questions during the interview. That way you can easily ask three or four questions. After you’re done with questions make sure to shake everyone’s hand again and thank them for their time. If you do all of these things correctly, there shouldn’t be a single employer who won’t hire you.

Catering Equipment for Year End Functions

It’s that time of the year when holiday cheer is in the air and companies are in full steam with planning their year-end functions. That means they are actively looking for a venue that will make their function a special one. They want to ensure that the venue looks good, food tastes great, and that all the facilities are there to make for a convenient and fun evening. Therefore, it is time for you to prepare your venue for the busy season ahead.

For small to large year-end functions you will need the following catering equipment.

· Robot Coupe Combo Food Processor. Food preparation is usually the lengthiest part of the cooking process. The Robot Coupe Combo Food Processor will enable you to automatically cut, slice, and grate vegetables thus saving you valuable time.

· Anvil Potato Peeler. If you’re serving hundreds of guests you’re going to have to peel a lot of potatoes. The Anvil Potato Peeler is a robust unit that automatically peels 12 kilograms of potatoes in 2 minutes.

· Chafing Dishes. For large numbers of guests, it can be challenging to keep a lot of food warm. They are also beautifully designed with a polished finish. This is a great way to keep food heated while it is waiting to be served.

· Bussing and Transport Carts. You’re going to need to clear up the dishes from at least 10 guest tables if you have a hundred guests. A bussing and transport cart will allow the waiters to quickly clear the tables and move the dishes to the kitchen. This will also minimize breakages.

· Water Jugs. Placing a jug of water and a jug of juice on each guest table will make them feel welcome.

· Dinnerware. For catering purposes you will need more than enough dinnerware such as plates, side plates, cups, and saucers. Also make sure you have drinks, wine, and champagne glasses. If you are serving a hundred people, ensure that you have dinnerware for 110 people. The additional amount of catering equipment is a contingency for any eventuality with breakages or damages.

· Urns. Once guests have had their meal they may want to enjoy a cup of hot coffee or tea. Having a coffee/tea station with an urn filled with hot water will keep your guests satisfied.

· Scotsman Ice Machine. A lot of cool drinks and alcoholic drinks are usually served at year-end functions so the demand for ice is very high. You will need to provide ice for hundreds of guests and their multiple drinks. An ice machine constantly makes ice on demand so you won’t run out of ice mid function.

· Commercial Refrigeration. You will need to keep a lot of drinks cold throughout the function so make sure that you have a refrigerator that can accommodate all the drinks.

The Dangers Of Overhead Power Lines Best Practices

Every year people at work are killed or seriously injured when they come into contact with live overhead electricity power lines.

If a machine, scaffold tube, ladder, or even a jet of water touches or gets too close to an overhead wire, then electricity will be conducted to earth. This can cause a fire or explosion and electric shock and burn injuries to anyone touching the machine or equipment. An overhead wire does not need to be touched to cause serious injury or death as electricity can jump, or arc, across small gaps.

One of the biggest problems is that people simply do not notice overhead lines when they are tired, rushing or cutting corners. They can be difficult to spot, eg in foggy or dull conditions, when they blend into the surroundings at the edge of woodland, or when they are running parallel to, or under, other lines. Always assume that a power line is live unless and until the owner of the line has confirmed that it is dead. This guidance is for people who may be planning to work near overhead lines

where there is a risk of contact with the wires, and describes the steps you should take to prevent contact with them. It is primarily aimed at employers and employees who are supervising or in control of work near live overhead lines, but it will also be useful for those who are carrying out the work.

Types of overhead power lines

Most overhead lines have wires supported on metal towers/pylons or wooden poles – they are often called ‘transmission lines’ or ‘distribution lines’. Most high-voltage overhead lines, ie greater than 1000 V (1000 V = 1 kV) have wires that are bare and insulate but some have wires with a light plastic covering or coating. All high-voltage lines should be treated as though they are uninsulated. While many low-voltage overhead lines (ie less than 1 kV) have bare insulate wires, some have wires covered with insulating material. However, this insulation can sometimes be in poor condition or, with some older lines, it may not act as effective insulation; in these cases you should treat the line in the same way as an insulate line. If in any doubt, you should take a precautionary approach and consult the owner of the line.

There is a legal minimum height for overhead lines which varies according to the voltage carried. Generally, the higher the voltage, the higher the wires will need to be above ground. Equipment such as transformers and fuses attached to wooden poles and other types of supports will often be below these heights. There are also recommended minimum clearances published by the Energy Networks Association.

What does the law require?

The law requires that work may be carried out in close proximity to live overhead lines only when there is no alternative and only when the risks are acceptable and can be properly controlled. You should use this guidance to prepare a risk assessment that is specific to the site. Businesses and employees who work near to an overhead line must manage the risks. Overhead line owners have a duty to minimize the risks from their lines and, when consulted, advise others on how to control the risks. The line owner will usually be an electricity company, known as a transmission or distribution network operator, but could also be another type of organization, eg Network Rail, or a local owner, eg the operator of a caravan park.

Preventing overhead line contact

Good management, planning and consultation with interested parties before and during any work close to overhead lines will reduce the risk of accidents. This applies whatever type of work is being planned or undertaken, even if the work is temporary or of short duration. You should manage the risks if you intend to work within a distance of 10 m, measured at ground level horizontally from below the nearest wire.

Remove the risk, the most effective way to prevent contact with overhead lines is by not carrying out work where there is a risk of contact with, or close approach to, the wires. Avoiding danger from overhead power lines. If you cannot avoid working near an overhead line and there is a risk of contact or close approach to the wires, you should consult its owner to find out if the line can be permanently diverted away from the work area or replaced with underground cables. This will often be inappropriate for infrequent, short-duration or transitory work. If this cannot be done and there remains a risk of contact or close approach to the wires, find out if the overhead line can be temporarily switched off while the work is being done. The owner of the line will need time to consider and act upon these types of requests and may levy a charge for any work done.

Risk control

If the overhead line cannot be diverted or switched off, and there is no alternative to carrying out the work near it, you will need to think about how the work can be done safely. If it cannot be done safely, it should not be done at all. Your site-specific risk assessment will inform the decision. Things to consider as part of your risk assessment include:

the voltage and height above ground of the wires. Their height should be measured by a suitably trained person using non-contact measuring devices;
the nature of the work and whether it will be carried out close to or underneath the overhead line, including whether access is needed underneath the wires;
the size and reach of any machinery or equipment to be used near the overhead line;
the safe clearance distance needed between the wires and the machinery or equipment and any structures being erected. If in any doubt, the overhead line’s owner will be able to advise you on safe clearance distances;the site conditions, undulating terrain may affect stability of plant etc;
the competence, supervision and training of people working at the site.

If the line can only be switched off for short periods, schedule the passage of tall plant and, as far as is possible, other work around the line for those times. Do not store or stack items so close to overhead lines that the safety clearances can be infringed by people standing on them.

Working near but not underneath overhead lines – the use of barriers. Where there will be no work or passage of machinery or equipment under the line, you can reduce the risk of accidental contact by erecting ground-level barriers to establish a safety zone to keep people and machinery away from the wires. This area should not be used to store materials or machinery. Suitable barriers can be constructed out of large steel drums filled with rubble, concrete blocks, wire fence earthed at both ends, or earth banks marked with posts.

If steel drums are used, highlight them by painting them with, for example, red and white horizontal stripes.
If a wire fence is used, put red and white flags on the fence wire.
Make sure the barriers can be seen at night, perhaps by using white or fluorescent paint or attaching reflective strips.

Avoiding danger from overhead power lines

The safety zone should extend 6 m horizontally from the nearest wire on either side of the overhead line. You may need to increase this width on the advice of the line owner or to allow for the possibility of a jib or other moving part encroaching into the safety zone. It may be possible to reduce the width of the safety zone but you will need to make sure that there is no possibility of encroachment into the safe clearance distances in your risk assessment.

Where plant such as a crane is operating in the area, additional high-level indication should be erected to warn the operators. A line of colored plastic flags or ‘bunting’ mounted 3-6 m above ground level over the barriers is suitable. Take care when erecting bunting and flags to avoid contact or approach near the wires. Passing underneath overhead lines, if equipment or machinery capable of breaching the safety clearance distance has to pass underneath the overhead line, you will need to create a passageway through the barriers, In this situation:

keep the number of passageways to a minimum;
define the route of the passageway using fences and erect goalposts at each end to act as gateways using a rigid, non-conducting material, eg timber or plastic pipe, for the goalposts, highlighted with, for example, red and white stripes;
if the passageway is too wide to be spanned by a rigid non-conducting goalpost, you may have to use tensioned steel wire, earthed at each end, or plastic ropes with bunting attached. These should be positioned further away from the overhead line to prevent them being stretched and the safety clearances being reduced by plant moving towards the line;
ensure the surface of the passageway is leveled, formed-up and well maintained to prevent undue tilting or bouncing of the equipment;
put warning notices at either side of the passageway, on or near the goalposts and on approaches to the crossing giving the crossbar clearance height and instructing drivers to lower jibs, booms, tipper bodies etc and to keep below this height while crossing;
you may need to illuminate the notices and crossbar at night, or in poor weather conditions, to make sure they are visible;
make sure that the barriers and goalposts are maintained.

Avoiding danger from overhead power lines

On a construction site, the use of goalpost-controlled crossing points will generally apply to all plant movements under the overhead line. Working underneath overhead lines. Where work has to be carried out close to or underneath overhead lines, eg road works, pipe laying, grass cutting, farming, and erection of structures, and there is no risk of accidental contact or safe clearance distances being breached, no further precautionary measures are required. However, your risk assessment must take into account any situations that could lead to danger from the overhead wires. For example, consider whether someone may need to stand on top of a machine or scaffold platform and lift a long item above their head, or if the combined height of a load on a low lorry breaches the safe clearance distance. If this type of situation could exist, you will need to take precautionary measures.

If you cannot avoid transitory or short-duration, ground-level work where there is a risk of contact from, for example, the upward movement of cranes or tipper trailers or people carrying tools and equipment, you should carefully assess the risks and precautionary measures. Find out if the overhead line can be switched off for the duration of the work. If this cannot be done:

refer to the Energy Networks Association (ENA) publication Look Out Look Up! A Guide to the Safe Use of Mechanical Plant in the Vicinity of Electricity Overhead Lines.2 This advises establishing exclusion zones around the line and any other equipment that may be fitted to the pole or pylon. The minimum extent of these zones varies according to the voltage of the line, as follows:
– low-voltage line – 1 m;
– 11 kV and 33 kV lines – 3 m;
– 132 kV line – 6 m;
– 275 kV and 400 kV lines – 7 m;
under no circumstances must any part of plant or equipment such as ladders, poles and hand tools be able to encroach within these zones. Allow for uncertainty in measuring the distances and for the possibility of unexpected movement of the equipment due, for example, to wind conditions;
carry long objects horizontally and close to the ground and position vehicles so that no part can reach into the exclusion zone, even when fully extended. Machinery such as cranes and excavators should be modified by adding physical restraints to prevent them reaching into the exclusion zone. Note that insulating guards and/or proximity warning devices fitted to the plant without other safety precautions are not adequate protection on their own;
make sure that workers, including any contractors, understand the risks and are provided with instructions about the risk prevention measures;
arrange for the work to be directly supervised by someone who is familiar with the risks and can make sure that the required safety precautions are observed;
if you are in any doubt about the use of exclusion zones or how to interpret the ENA document, you should consult the owner of the overhead line.

Where buildings or structures are to be erected close to or underneath an overhead line, the risk of contact is increased because of the higher likelihood of safety clearances being breached. This applies to the erection of permanent structures and temporary ones such as polytunnels, tents, marquees, flagpoles, rugby posts, telescopic aerials etc. In many respects these temporary structures pose a higher risk because the work frequently involves manipulating long conducting objects by hand.

Avoiding danger from overhead power lines. The overhead line owner will be able to advise on the separation between the line and structures, for example buildings using published standards such as ENA Technical Specification 43-8 Overhead Line Clearances.1 However, you will need to take precautions during the erection of the structure. Consider erecting a horizontal barrier of timber or other insulating material beneath the overhead line to form a roof over the construction area – in some cases an earthed, steel net could be used. This should be carried out only with the agreement of the overhead line owner, who may need to switch off the line temporarily for the barrier to be erected and dismantled safely.

Ideally, work should not take place close to or under an overhead line during darkness or poor visibility conditions. Dazzle from portable or vehicle lighting can obscure rather than show up power lines. Sometimes, work needs to be carried out near uninsulated low-voltage overhead wires, or near wires covered with a material that does not provide effective insulation, connected to a building. Examples of such work are window cleaning, external painting or short-term construction work. If it is not possible to re-route or have the supply turned off, the line’s owner, eg the distribution network operator, may be able to fit temporary insulating shrouds to the wires, for which a charge may be levied. People, plant and materials still need to be kept away from the lines.

Emergency procedures

If someone or something comes into contact with an overhead line, it is important that everyone involved knows what action to take to reduce the risk of anyone sustaining an electric shock or burn injuries. Key points are:

never touch the overhead line’s wires;
assume that the wires are live, even if they are not arcing or sparking, or if they
otherwise appear to be dead;
remember that, even if lines are dead, they may be switched back on either automatically after a few seconds or remotely after a few minutes or even hours if the line’s owner is not aware that their line has been damaged:
if you can, call the emergency services. Give them your location, tell them what has happened and that electricity wires are involved, and ask them to contact the line’s owner:
if you are in contact with, or close to, a damaged wire, move away as quickly as possible and stay away until the line’s owner advises that the situation has been made safe:
if you are in a vehicle that has touched a wire, either stay in the vehicle or, if you need to get out, jump out of it as far as you can. Do not touch the vehicle while standing on the ground. Do not return to the vehicle until it has been confirmed that it is safe to do so;

Avoiding danger from overhead power lines, be aware that if a live wire is touching the ground the area around it may be live. Keep a safe distance away from the wire or anything else it may be touching and keep others away.

Plans for Your Business Venture

Whatever the health and condition of your business venture, it will benefit from planning. Business planning of all types provides a road-map that guides the leadership team to successfully achieve business goals.

I’ve taught business plan writing for more than 10 years and I’ve also developed a one-day business plan writing workshop. As I see it, the process of business planning gives company leaders opportunities to see the big picture and remove “magical thinking” from the process. Business planning first reveals if the proposed goals are potentially viable and second, requires that we devise strategies that will make them a reality.

What your team wants to achieve will shape the plan that is written. For example, if the mission is to launch a start-up that will require significant outside investment, then the plan will include detailed financial projections. Additionally, marketing strategies that delve into customer acquisition, the competitive landscape, the logistics of the product or service launch, messaging and sales distribution, along with operational aspects such as manufacturing, staffing and quality control, must be thoroughly detailed.

Solopreneur consultants will focus heavily on marketing, in particular defining the target clients and client acquisition; providing services for which there is adequate demand; and appropriate pricing. Financial planning will focus on allocating the budget to support promotional strategies and marketing campaigns.

Whether the plan will be used to launch a big venture and attract outside investment money or open a boutique-style consulting service, include the following elements:

EXECUTIVE SUMMARY

Present the business mission statement here. Include as well the date the business was formed; the leadership team and other key management personnel; the credentials or experience that make you and the leadership team uniquely qualified to launch and successfully run the venture; the business legal structure (LLC, Sole Proprietor, or Corporation); the products and services; one or two key competitive advantages; a concise overview of sales projections; and the amount of capital needed if recruiting investors or obtaining bank financing is a goal.

BUSINESS DESCRIPTION

It’s traditional to present a brief description of your industry and its outlook, nationally and regionally. Give the details of your products and services and briefly discuss how they’ll be used by target customers. Identify whether the venture is B2B, B2C, or B2G. If the organization holds a patent, review the competitive advantages that it will convey. Have there been any technological advances that will help or hinder the enterprise? Divulge the details here.

MARKETING

This element is a big tent that encompasses sales, product or service distribution, competitors, advertising, social media, PR, networking, branding, customer acquisition and pricing. Plans written for a small organization will spotlight the role of marketing because for Solopreneurs, success hinges on identifying and reaching paying clients, as well as pricing the services advantageously.

FINANCE

Whether you’re wealthy enough to self-finance or the venture is small and not especially demanding of capital investment, the leadership team nevertheless needs to know with a reasonable degree of certainty how much money will be required to achieve important goals.

The plan might be written to support financing for the acquisition of new office space, additional staffing, or manufacturing equipment. Bank loans typically require a business plan to demonstrate how the investment money would be used and how the organization will generate funds for loan repayment.

If the goal is to attract investors, they’ll need to be convinced by the projected sales revenue figures (as will the bank), so they’ll know when their investment will be repaid and when to expect profits if they are made co-owners of the business. A break-even analysis, projected income statement, projected cash-flow statement and projected balance sheet are required by those who will need significant money.

OPERATIONS

How will day-to-day business processes function? Tell it here, along with providing the organizational chart, the business location, the method of producing that which you sell (if you are, for example, a freelance book editor or graphic designer, you produce the service yourself), your usual sub-contractors (if you are a special events organizer, who are your preferred caterer, florist and limo service?) and quality control methods. This element is about logistics.

Global Greenhouse Sector

What exactly is a Greenhouse? It is a name given to a structure with roofs and walls made primarily out of a transparent substance like glass. Within a greenhouse, plants that need regulated climatic conditions are cultivated with an aim of healthier output. These buildings vary in size from smaller sheds, to larger commercialized structures. In this current scenario, greenhouses are part of modern-day farming which is focused towards protected cultivation of plants in an enclosed shelter, without allowing any type of damage to the product as well its nutrients.

People who love home-grown veggies and fruits will definitely prefer a greenhouse. This is due to its ability to provide an effective method to cultivate plants protected from the harsh external environment. Greenhouses are usually equipped with clear or glass-plastic walls that enable them to preserve heat, while also allowing light to enter. The resulting situation brings the ideal factors for cultivating many kinds of plants.

Quite a number of commercial glass greenhouses are categorized under innovative production houses for flowers and vegetables. The active greenhouse market trends are surely leaned towards modern facilities. The inclusion of heating, lighting, screening installations etc., are needed for the automated growth of plants. Moreover, various techniques are implemented for ensuring a significant decrease in production risk before the cultivation of a particular crop.

Smart Greenhouses

To meet the needs of the sector, greenhouses are produced for high dependability and performance. These types of structures offer valuable data regarding a material’s stability, composition, response to wear and tear atmosphere and external factors. Greenhouses thus contain applications for different types of processes like food production and scientific research.

For instance, the smart greenhouse is an innovation in farming and is a climate managing, a self-regulating procedure that is perfect for plant survival. It helps to create a micro-climate environment which is like a new climate in a restricted zone. This zone is created by the use of sensors and various applications. The smart greenhouse contains different components like monitoring system, actuators, and control system. The concept of smart greenhouse aims to ease growth situations for plants and creates an autonomous growing process.

Extended Growing Season

Plants grown in a greenhouse are not subjected to the same degree of temperature differences which is needed for plants cultivated in an outdoor garden. Based on latest trends, greenhouses trap radiation that comes from the sun into its insides and enables the retention of heat within the enclosure. The controlled climate that is achieved in a greenhouse helps farmers to lengthen the growing season of plants which may not survive the colder climate outside of the greenhouse. This allows consumers to buy locally cultivated vegetables, flowers, and fruits which are out of season.

Control over the Produce

People without a garden are bound to buy their food at the groceries or farmers’ market. On the other hand, commercial farms usually use toxic pesticides and chemicals, to enhance the living situations of crops and improve production. When businesses try to prepare a greenhouse industry analysis, the first aspect that they learn are the crucial advantages that are connected with the implementation of greenhouses.

A test conducted by an environmental group revealed several vital facts. It found trace amounts of toxic stuff over the produce even after the harvest. Greenhouses help farmers grow their own food to gain absolute control over their environment. This process produces tasty and fresh food without the risks of toxic chemicals, which can potentially be hazardous.

Food Boost from Plant Isolation

A greenhouse maintains the plants in isolation, preserved safely from the external world comprising pests, rodents, and insects, along with other animals. According to the research gathered by big universities, gardeners must isolate their plants by using a greenhouse which is sealed and caulked. An efficient greenhouse with absolute isolation and tightly sealed, along with expertly managed air flow which offers protection from insects, pests and even from diseases should be preferred by the farmers.

A Virtual Assistant

In this year and age, everything is related to the internet. From shopping, banking, bills payment, social interaction, communication and every bit of actions we humans do nowadays was somehow linked to the use of the internet. For several years I had been working a very traditional job in retail. However, personal circumstances made me re-think my current situation. A part of me always feels that traditional jobs here in the Philippines are very time-consuming. With a standard 48-hour work and a 1-day off per week, quality time with family and peers seems unlikely. So if work schedules are eating much of our time, is it after all worth it? This question bugged me for a lot of months. Then one day I came across KOM Academy’s Facebook posting for a free seminar on “How to be a Virtual Assistant.” Curious, I immediately inquired and pre-registered for this event. That’s when I realized that there are a lot of opportunities outside the traditional work environment.

What is a Virtual Assistant by the way? These are smart individuals offering administrative, creative and technical skills to remote clients. So what made me think this virtual job is kick-ass better than my old job? Reason number 1, “I am my boss”! As VA, as they call it, you work as an independent contractor to the client. Which means that you don’t work for a company or an employer, but instead they outsource you to render them the services they require. About this, you are not limited to work for a single client. Hence, the second reason – more clients, more income. By this I mean you can are not limiting yourself to only one source of income. You have the control to expand your financial gains as you deem fit. The third reason, it is home-based. What is not to love working at the comforts of your space? No hassle from commuting, dealing with worsening traffic situation of the city, increased transportation expenses, annoying amnesiac office mates who always borrow your things but never bothers to return them are just a few to mention.

If there is a convenience in the environment, work schedule is something that is flexible as well in this industry. That is the fourth reason why I considered engaging into this business. The chance to be given a schedule that is favorable to your liking is something that is highly unheard of in traditional jobs. Often you must be employed a full-time job to get a decent salary. Whereas in VA, even part-time jobs can still get you good pay. Mainly because you are paid based on the quality of your work output and not just merely on the number of hours you spent. Furthermore, output-based jobs present more opportunity for workers to get promoted as evaluation is real-time.

The fifth reason I seriously consider is that this job is never boring. As mentioned earlier, VAs provide different service from administrative, to creative and even technical for those highly-skilled individuals like the programmers. Thus, this job can present you wide range of tasks that you can explore and hone your skills.

These things cited above are just a few of the factors why I considered becoming a Virtual Assistant. To have the convenience of time and place in your hands is a privilege that an ordinary worker won’t be able to experience in a traditional work setting. As I go along my journey into this business, I am looking forward to discovering more things to love and enjoy.

To be successful in business, sometimes the wisest move to make is to ask for help. Remember that you don’t have to do it all alone. Get a co-worker from a distance!

The Cybercrimals

The mindset of an individual who would want to attack the computers and networks owned by others is, without question, criminal. The act of intruding upon another confidential personal or business information requires a pre-meditated and calculated act. Its purpose is to inflict financial or personal harm on others by stealing money, denying the use of their information or to gain illegal access to proprietary plans. The cybercriminal is totally cynical and strives to remain in the shadows.

People who attack the information assets of others are on the prowl for system weaknesses to exploit. The prime targets are unsuspecting individuals or businesses that are vulnerable to the attack modes chosen by cybercriminals. They are deceitful and seek the cloak of anonymity.

The true nature of someone who would access, use and exploit your private information is a mixed bag. His or her character is between that of a person who would enjoy searching through your personal items and an employee who would embezzle money from a corporation.

The focus of crackers and hackers is to use their specialized knowledge to encroach upon the private lives of people and organizations. Electronic thieves seek to take advantage of people who are without information needed to fight back and block them. Cyber criminals are true low-life.

Digital bandits are sociopaths who ply their trade without regard to the harmful effects they have on others and truly lack remorse. What’s particularly unsettling about felonious computer whizzes is that they are usually very intelligent. They are without a conscience and enjoy stealing and hurting others.

Computer crooks can be ranked on a scale from “less skilled” to “expert”. Anyone can download basic cracking software from the Internet. The real pros, however, study their targets over time in stealth mode. The highly skilled cracker plans and analyzes the victim to get the maximum effect.

Preying upon unsuspecting users is among the most disturbing behaviors of the PC and mainframe pirates. Most computer users are unaware of how many threats and vulnerabilities that they face when they power-up their computer or go online. Lawless computer users thrive on the ignorance of others.

So how do you fight those who would breach your personal data with the purpose of stealing or hurting you in a variety of different ways? Presume that the bad guys are trying to break into your system. Use your knowledge and security best practices to block them.

You should:

1. Develop a security mindset
2. Assess your risks
3. Use complex passwords and phrases for your system(s)
4. Identify and eliminate common vulnerabilities
5. Routinely update software patches and fixes
6. Probe and test electronic systems
7. Use appropriate security-related hardware and software (e.g. anti-virus software, firewalls)
8. Lock your computer screen when you leave your work area
9. Encrypt and back up all of your data
10. Practice good cyber hygiene (e.g. avoid clicking on email links and attachments)
11. Avoid maintaining a persistent Internet connection

You can defend against those who would try to harm you using digital technology and the Internet. Obstruct the pathways that are followed by lawless information thieves.

Your Business Needs Steady Cash Flow

The ability to make critical purchases from your vendors, pay down loans, and meet employee payroll has become a common problem among businesses across all industries. Cash flow has always been a major issue with all businesses and without positive cash in your bank your business could fail. By the time a business realizes their cash flow isn’t going to support their payroll, or pay vendors, the owners make rash decisions by going to companies/banks that can destroy their business.

If you realize your business is about to fall into this position, don’t panic. Review your financial situation with your accountant or CPA. But don’t act too fast. There is another option.

So what can you do to avoid this problem?

Before telling you the solution, let’s talk about the 3 things you should NOT do.

1- Bank Loans. If you think a bank will help finance your old or slow paying customers, well they are not.

2- Factoring Invoices or Receivables. Another myth. When companies rely on this method of cash flow, it just reduces your profits. Plus, once your invoices or receivables have been factored, most often this “third” party who now owns them will be so aggressive with your customers to collect the money that it can ruin your business by losing a customer.

3- Collection Agency. If all you want is someone to harass your customers, then call a collection agency. Odds are, they will just irritate your customers with strong-arm tactics that never work and here again you will lose another customer.

What you need is positive cash flow, right? Well you can have positive cash flow and retain your customers by using a reputable company that knows how to talk to your customers in a manner that will actually convenience them to make timely payments without losing them as a customer.

A credit management system can provide effective cash flow by acting seamlessly with your accounting department. This should NOT impact your accounting staff when handled properly. The slow paying customers and poor receivables from your accounting department should be quickly identified and presented to management in a timely manner. It is best you do not use a middleman, or off-shore calling, These will just hurt your business more because your customers know these types of calls who only want to collect the money, not help make a payment plan.

There are many articles to help find a good credit management resource. Do your research and seek out those that have a solid reputation and work with you as your in-house accounting department.

A Perfect Sales Training Coach

Even though there isn’t any formal education required to be a bigwig in sales, it is true that most of the people are involved in selling products and services. One can find several people performing sales tasks and each and every one of them are trying to complete with one another. In order to stand a class apart from others, it is important to acquire some excellent selling skills, determination and the perfect mindset. It is very important to move along with the change, as the environment keep on changing. So, it is essential to think out of the box, as it helps to stay ahead of the business rivals. So, it is essential to stay equipped with some of the effective sales tips by availing the services of a sales coach. Only those who are well trained to perform such tasks must perform the task of sales. This task should be performed by the experts in sales training. When you are in search of an expert, you must know that there are several speakers across the globe who claims to be the sales coach. However, make sure that you choose a perfect person offering useful sales tips programs to enjoy the maximum output. You must consider certain aspects while selecting the perfect sales training coach to save your money and time.

About Choosing the Right Sales Training Coach
It is important to consider the right kind of issues prevailing in your business to get the perfect solution immediately. There might be many areas in your business that require improvement. Generally, your sales managers would need you to enhance the performance of their team. So, it needs you to redefine the current sales process and the way through which it is executed. So, make sure that you hire the services of a best sales training coach who can improve the sales strategies as well as the selling skills of your workforce.

Top qualities of a sales training coach
The sales training coach whom you are choosing must have the following qualities to prove that he is a sales pro.
1 Highly experienced: The sales training coach whom you approach must be the one who has immense years of experience to handle the sales process. Observe the training coach’s path of career and check his achievements in the career timeline. Choose the person who has a lot of professional experience is the proof that this sales coach is reliable and credible.
2 Interaction with sales team: The expert sales training coach must know the secret of winning the trust of your sales team. He should have handled several sales teams in his career and must be able to interact with them in a positive fashion. This quality of a coach can help your sales build the trust on the tips for selling he teaches them.
3 Should provide intelligent coaching: The sales coach must hold intellectual sales training sessions that have activities which can kindle the sales skills of your work team. The training sessions or coaching classes that the coach conducts should be related to the specific industry of your business to improve the sales wing of your business. The sales coaching should be aimed at helping your work team members become experts in their related field.

The sales training program that the coach offers should have several components that are essential for the growth of the organization. So, it is important for you to avail the services of a sales coach like. We to give your sales team the much needed push.